After having run your experiment, it is tempting to skip the pipette tips cleaning step – you must do it!!! One of the best parts of obtaining the correct outcomes from your tests is having a clean pipette tip. Using dirty pipette tips will ruin your results and cause issues. To that end, Shengke has prepared a short guide to washing and cleaning pipette tips.
However before we enter into the cleaning of pipette tips, we must get a little bit of the background information about the cleanliness importance related to the pipette tips. A pipette tip is a small attachment that aids in transferring minute volumes of liquid from one container to another. A dirty tip may contain residual material from a previous experiment. Which means when you move the liquid, it might not be clean. Such fouling will lead to either a failure of your experiment or incorrect results. This can definitely be quite annoying and time and resources wasting especially so that is why you should always start with clear tips.
Rinse and sterilize again: After the swirling motion rinse the tip of with distilled water for a second time to remove any cleaning solution. And then finally, you have to make it sterile. This can be done with an autoclave or another approved way that guarantees the tip is sterilized and ready for use.
There are basic ways to keep your pipette tips clean at all times, after cleaning. Now, make sure you always use a high-quality cleaning solution that can effectively wash away any residues that might be left behind from previous experiments. A topical cleaning solution is strongly recommended.
Sometimes it is tempting to reuse pipette tips between experiments but this should be avoided as any risk of carryover can result in major problems down the line. Dirty pipette tips can lead to contamination and can spoil your results as we said before. This is how you might think that your experiment was successful when it actually was not!
Increased risk of cross-contamination due to reuse of pipette tips. In other words, liquids from one experiment can contaminated liquids from a addition, which can throw off your results. However, this will expose you to these risks, and to make sure your experiments are accurate, always use a new pipette tip each time you do an experiment.
In summary, by employing the appropriate techniques for cleaning pipette tips, you can significantly improve the overall functioning of your laboratory. From the Type of Pipette Tips You Use When you are using Pipette tips that are clean and in good condition, the chances to make a mistake or face contamination also get reduced. This can shorten the duration and cost of your experiments, and smooth out the process.Trim your experiments времени и стоимости, и сделать ваш эксперимент проходить гладче.
Welcome to CellProBio, we are a manufacturer of biomedical consumables. products : Pipette tips, centrifuge tube, cell culture Series, PCR Series
Building 1, No.18 Dongchang Road, Suzhou Industrial Park, Jiangsu Province
Copyright © Suzhou CellPro Biotechnology Co., Ltd. All Rights Reserved Privacy Policy
